Pro Starter Kit

APPLICATION

1. For the perfect nail prep, please ensure you have read and followed our detailed ‘How To’ guide under ‘Nail Preparation’ HERE.

2. Gently roll your One Step Gel Polish bottle between your palms to thoroughly blend the formula.

3. Apply a fine layer of our One Step Gel Polish onto the nails, ensuring meticulous coverage. Cure the polish for 60 seconds under our nail lamp. Maintain a slight distance from the cuticle and nail edges to prevent any polish from contacting the skin, thus ensuring a pristine finish. Repeat the application process until achieving the desired opacity.

5. Apply Cuticle Oil to your cuticles and massage into your skin for a salon finish mani!

REMOVAL

Gel Remover

1. Begin by gently buffing the shine off your One Step Gel Polish using the rough side of our Essential Buffer

2. Apply two coats of our Gel Remover onto the buffed nails, ensuring careful application to avoid contact with the skin. Allow 30 seconds between each coat.

3. Allow 3-5 minutes for our One Step Gel Remover to effectively penetrate the One Step Gel Polish. Sensations of slight tightness indicate the lifting of the polish from the nails, which is a normal occurrence.

4. Once the One Step Gel Polish becomes flaky, utilise our Pro Scraper Tool to remove the gel polish from your nails.

5. If any excess One Step Gel Polish remains, repeat the aforementioned process.

6. Use soft side of our Essential Buffer to delicately eliminate any residual residue.

7. Give your hands a wash, and you are ready for your next manicure.

Peel Off Base Coat

1. Using the flat side of an Orange Wood Stick, gently glide along the edge of your One Step Gel Polish to lift it from the nail surface. Once it begins to lift, you can easily peel off the remaining cured polish using your fingers.

2. Lightly buff any remaining tacky layer with our Essential Buffer, then wipe the nail clean using an Alcohol Prep Pad.

For gel storage: Store your One Step Gel polish upright in a cool, dry, dark place. Seal caps tightly, clean bottle necks after use, and avoid heat, humidity, and direct sunlight to maintain consistency and prevent clumping. For best quality, use within 12 months of opening.

To clean your tools: Using a cotton pad and 100% isopropyl alcohol, wipe down your tools and allow to air dry before storing. This will effectively remove gel and buildup while also sanitising your tools. To maintain quality and hygiene, we recommend cleaning your tools before and after each manicure.

Nail Lamp Power:

• (24) 2-watt LED lights [48 watts]
• Rated input: 100-240V 50/60Hz 1A
• Dimension: 220mmx195mmx105mm
• Cures all five fingers at once
• Power indicator light
• Infrared induction LED lights
• Preset Buttons- 10s, 30s, 60s, 99s Low Heat Mode
• 2-meter cord with Australian plug for convenient use
• Available in 240 volts
• Detachable Base
• 90 day warranty

One Step Gel: 2-Propenoic acid, 2-methyl-, polymer with butyl 2-propenoate and methyl 2-methyl-2- 82% propenoate, Pentaerythritol tetrakis(3-mercaptopropionate), Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide, 2-Isopropylthioxanthone, Dimethicone

One Step Gel Remover: Ethanol, Sodium hydroxide, Sodium polyacrylate, 2-hydroxyethyl 2-methylprop-2-enoate, 2-Propenoic acid, ethyl ester, polymer with N-(1,1-dimethylethyl)-2-propenamide and 1-ethenyl-2-pyrrolidinone