Advent Calendar PRE ORDER | DISPATCHING FROM 10 NOVEMBER

Application

1. For the perfect nail prep, please ensure you have read and followed our detailed ‘How To’ guide under ‘Nail Preparation’ HERE.

2. Begin by applying one coat of our 2in1 Base Coat and Extension Gel Adhesive. Be sure to cap the free edge for a complete seal, then cure for 60 seconds under
our Nail Lamp.

OPTION ONE - Builder Gel Structure Application

3. Apply a thin, even layer of Coloured Builder Gel — this is your slip layer (do not cure this layer)

4. Pick up a small bead of Coloured Builder Gel and float it over the nail to build structure, focusing on creating a smooth apex.

5. Use a thin liner brush in our Nail Art Brush Set to gently guide the gel toward the side walls and cuticle line for even coverage.

6. Turn your hand upside down for a few seconds to help the gel self-level and create the perfect shape.

7. Flash cure the nail for 10 seconds under the Ezmio Nail Lamp or Flash Cure Lamp to prevent the gel from moving.

8. Complete one finger at a time, then cure the entire hand for using the 99s low heat mode setting (this will help avoid heat spikes).

9. Optional – After curing, remove the sticky layer with an Alcohol Prep Pad, then refine the shape of your nails using our Essential Buffer and Essential File.

10. Apply a coat of our No Wipe Top Coat, making sure to cap the free edge. Cure for 60 seconds under our Nail Lamp.

11. Finish by applying Cuticle Oil and gently massaging it into your skin for a salon-quality result.

OPTION TWO - Quick Application

3. Apply 2 thin coats of Coloured Builder Gel, curing using the 99s low heat mode setting (this will help avoid heat spikes).

4. Apply a coat of our No Wipe Top Coat, making sure to cap the free edge. Cure for 60 seconds under our Nail Lamp.

5. Finish by applying Cuticle Oil and gently massaging it into your skin for a salon-quality result.

Removal

 There are multiple ways to remove your Ezmio manicure.

Option 1: Pre-Soaked Acetone Gel Remover Wraps

1. Gently file the surface of your gel enhancement until approximately 20% of the product remains.
2. Tear open the sachet along the dotted line.
3. Place your finger inside the wrap, ensuring the cotton pad completely covers your nail.
4. Remove the backing from the adhesive strip, then wrap and press firmly to create a secure seal around your finger.
5. Leave on for 10–15 minutes.
6. Remove the wrap and gently use the Ezmio Pro Scraper Tool to lift away the softened gel.

💡 Pro Tip: Always work from the cuticle towards the tip of the nail. Never force or scrape away any remaining product. If any gel remains, apply a fresh wrap and leave for a further 5 minutes. Finish by lightly buffing the nail and applying cuticle oil or hand cream to restore moisture.

Please note: Removal time may vary depending on the thickness of your application. Builder Gel and Soft Gel Extensions may require additional wraps or soaking time after filing the surface.

Option 2: Acetone Soak-Off with Foil Gel Remover Wraps

1. Gently file the surface of your gel enhancement until approximately 20% of the product remains.
2. Saturate the attached cotton pad with acetone.
3. Place the cotton pad directly over the nail and wrap the foil tightly around your finger to create a secure seal.
4. Leave on for 10–15 minutes.
5. Remove the wrap and gently use the Ezmio Pro Scraper Tool to lift away the softened gel.

💡 Pro Tip: Always work from the cuticle towards the tip of the nail. Never force or scrape away any remaining product. If any gel remains, re-wrap the nail for a further 5 minutes. Finish by lightly buffing the nail and applying cuticle oil or hand cream to restore moisture.

Please note: Removal time may vary depending on the thickness of your application.

Option 3: Peel Off Base Coat

If you applied Ezmio Peel Off Base Coat underneath your gel polish:

1. Using the flat side of an Orange Wood Stick, gently glide along the edge of your gel polish to lift it from the nail.
2. Once the product begins to lift, gently peel away the remaining gel using your fingers.
3. Lightly buff away any remaining residue using the Ezmio Essential Buffer.
4. Wipe the nail clean with an Alcohol Prep Pad.
5. Finish by applying cuticle oil or hand cream to restore moisture.

💅 Perfect for those who love changing their nail colour regularly.

How to Store Gel Polish

To keep your gel polish performing at its best, store it in a cool, dry place away from direct sunlight, heat, or open flames. Always make sure the lid is tightly closed after each use to prevent air exposure, thickening, or curing inside the bottle.

Avoid storing near UV/LED lamps (even when turned off), as ambient light can begin to cure the product over time.

For best results, use within 12 months of opening and clean the bottle neck regularly to keep the lid airtight and easy to open.

How to Clean the Neck of Your Gel Bottle

Over time, gel polish can build up around the neck of your bottle — making it harder to open and potentially letting air in, which thickens your polish.

To keep your gel fresh and your bottle easy to use:

Use a lint-free wipe soaked in isopropyl alcohol (or gel cleanser).

Wipe around the bottle neck and inside the cap threads to remove any dried product.

Avoid using acetone, as it can damage the bottle or affect the polish.

Clean the neck after each use if possible — especially before storing it away.

Pro Tip: A clean bottle neck also prevents that dreaded “crusty lid” moment and helps your polish last longer!

Curing Wavelengths

All Ezmio gel products are designed to cure under standard UV/LED lamps at wavelengths between 365–405 nm. Cure time is 60 seconds under our Ezmio Nail Lamp.

15 mL / 0.5 fl. oz.

Made in China

Ingredients: The ingredients found across the 12 gels are listed below. To keep the surprise element of our Advent Calendar, we have not disclosed which ingredients belong to each individual gel.

For full transparency and detailed ingredient information, click here to view the full Safety Data Sheets (SDS).

Polyurethane-80, Hydroxypropyl Methacrylate, Silica, Triethylene Glycol Dimethacrylate, Dimethicone, +/- CI 77891, CI 77499, CI77491, CI 77510, Solvent Violet 13, Fluorphlogopite, Polymethyl Methacrylate, Mica, Iron Powder.

Polyurethane-80, Hydroxypropyl Methacrylate, Bis-Trimethylbenzoyl Phenylphosphine Oxide, Silica, Dimethicone, +/- CI 77891, CI 77491, CI 77499, CI 77510, CI 77288, CI 77742, Polymethyl Methacrylate, Iron Powder, Polyethylene Terephthalate, Glass, Tin Oxide, Platinum Powder, Synthetic Fluorphlogopite.

Polyurethane-80, Hydroxypropyl Methacrylate, Silica, Hydroxycyclohexyl Phenyl Ketone, Dimethicone, +/- CI 77891, CI 77491, CI 77499, Alumina, Polymethyl Methacrylate, Polyethylene Terephthalate, Glass, Tin Oxide, Aluminum Powder.

Acrylates Copolymer, Trimethylbenzoyl Diphenylphosphine Oxide, Pentaerythrityl Tetrakis(3-mercaptopropionate), Dimethicone, [+/- CI 14700, CI 77491, CI 77492, CI 77019, CI 77742, CI 77891, CI 15850]