Belle Ballerina | Builder Gel

Application

1. For the perfect nail prep, please ensure you have read and followed our detailed ‘How To’ guide under ‘Nail Preparation’ HERE.

2. Begin by applying one coat of our 2in1 Base Coat and Extension Gel Adhesive. Be
sure to cap the free edge for a complete seal, then cure for 60 seconds under
our Nail Lamp.

OPTION ONE - Builder Gel Structure Application

3. Apply a thin, even layer of Coloured Builder Gel — this is your slip layer (do not cure this layer)

4. Pick up a small bead of Coloured Builder Gel and float it over the nail to build structure, focusing on creating a smooth apex.

5. Use a thin liner brush in our Nail Art Brush Set to gently guide the gel toward the side walls and cuticle line for even coverage.

6. Turn your hand upside down for a few seconds to help the gel self-level and create the perfect shape.

7. Flash cure the nail for 10 seconds under the Ezmio Nail Lamp or Flash Cure Lamp to prevent the gel from moving.

8. Complete one finger at a time, then cure the entire hand for using the 99s low heat mode setting (this will help avoid heat spikes).

9. Optional – After curing, remove the sticky layer with an Alcohol Prep Pad, then refine the shape of your nails using our Essential Buffer and Essential File.

10. Apply a coat of our No Wipe Top Coat, making sure to cap the free edge. Cure for 60 seconds under our Nail Lamp.

11. Finish by applying Cuticle Oil and gently massaging it into your skin for a salon-quality result.

OPTION TWO - Quick Application

3. Apply 2 thin coats of Coloured Builder Gel, curing using the 99s low heat mode setting (this will help avoid heat spikes).

4. Apply a coat of our No Wipe Top Coat, making sure to cap the free edge. Cure for 60 seconds under our Nail Lamp.

5. Finish by applying Cuticle Oil and gently massaging it into your skin for a salon-quality result.

Removal

There are two ways to remove your Ezmio Builder Gel manicure:

Option 1: Peel Off Base Coat

If you applied Ezmio Peel Off Base Coat underneath your Builder Gel:

1. Using the flat side of an Orange Wood Stick, gently glide along the edge of your Builder Gel to lift it from the nail surface.
2. Once the product begins to lift, gently peel away the remaining cured Builder Gel using your fingers.
3. Lightly buff away any remaining residue using the Ezmio Essential Buffer.
4. Wipe the nail clean using an Alcohol Prep Pad.

Option 2: Acetone Soak Off

1. Using the Ezmio Remover File, gently file away approximately 80% of the Builder Gel.
2. Soak a cotton pad with pure acetone and place it over the nail.
3. Secure with foil wraps or soak-off clips and leave for 10–15 minutes.
4. Use the Ezmio Scraper Tool to gently push away the softened Builder Gel.
5. If any product remains, re-soak and repeat. Never force or peel the product from the nail.
6. Gently buff away any remaining gel residue using the Ezmio Essential Buffer.
7. Finish by applying cuticle oil to nourish the nails and surrounding skin.

💡 Removal time may vary depending on the thickness of your application.

How to Store Gel Polish

To keep your gel polish performing at its best, store it in a cool, dry place away from direct sunlight, heat, or open flames. Always make sure the lid is tightly closed after each use to prevent air exposure, thickening, or curing inside the bottle.

Avoid storing near UV/LED lamps (even when turned off), as ambient light can begin to cure the product over time.

For best results, use within 12 months of opening and clean the bottle neck regularly to keep the lid airtight and easy to open.

How to Clean the Neck of Your Gel Bottle

Over time, gel polish can build up around the neck of your bottle — making it harder to open and potentially letting air in, which thickens your polish.

To keep your gel fresh and your bottle easy to use:

Use a lint-free wipe soaked in isopropyl alcohol (or gel cleanser).

Wipe around the bottle neck and inside the cap threads to remove any dried product.

Avoid using acetone, as it can damage the bottle or affect the polish.

Clean the neck after each use if possible — especially before storing it away.

Pro Tip: A clean bottle neck also prevents that dreaded “crusty lid” moment and helps your polish last longer!

Curing Wavelengths

All Ezmio gel products are designed to cure under standard UV/LED lamps at wavelengths between 365–405 nm. Cure time is 60 seconds under our Ezmio Nail Lamp.

15 mL / 0.5 fl. oz.

Made in China

Acrylates Copolymer, Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide, Pentaerythrityl Tetra(3-mercaptopropionate), Dimethicone