Rhinestone Glue Gel

1. Use the brush or dotting tip to apply a small amount of glue where desired.
2. Place your nail gems or embellishments into the gel.
3. Cure for 60 seconds under a UV/LED lamp.

Pro Tip: For larger gems, apply a slightly thicker layer to fully support the stone before curing for maximum hold.

How to Store Your Rhinestone Glue Gel

To keep your glue gel performing at its best, store it in a cool, dry place away from direct sunlight, heat, or open flames. Always ensure the lid is tightly closed after each use to prevent air exposure, thickening, or curing inside the bottle.

Avoid storing near UV/LED lamps (even when turned off), as ambient light can begin to cure the product over time.

For best results, use within 12 months of opening and keep the bottle neck clean to ensure an airtight seal and easy opening.

How to Clean Your Applicator

To keep your Rhinestone Glue Gel performing at its best, always clean the applicator before closing the lid.

• Wipe the dotting tip with a lint-free wipe soaked in isopropyl alcohol (or use an alcohol prep pad) to remove any excess product.
• If using the liner brush side, ensure the neck of the bottle is clean from any gel to prevent build-up and sticking.
• Ensure the tip is clean to prevent build-up and maintain precise application.
• Always close the lid tightly after cleaning to prevent the gel from thickening or curing.
  

Pro Tip: Keeping the applicator clean helps maintain smooth, controlled placement and extends the life of your product.

Curing Wavelengths

All Ezmio gel products are designed to cure under standard UV/LED lamps at wavelengths between 365–405 nm. Cure time is 60 seconds under our Ezmio Nail Lamp.

8 mL / 0.27 fl. oz.

Made in China

Acrylates Copolymer, Acrylates/VP Copolymer, Styrene/Acrylates Copolymer, Hydroxypropyl Methacrylate, Hydroxycyclohexyl Phenyl Ketone, Trimethylbenzoyl Ditolylphosphine Oxide